|
|
Creation of thematic map of park
Karafiát, Lukáš ; Řezníček, Ivo (referee) ; Kalvoda, Petr (advisor)
The bachelor thesis deals with creating a thematic map of park Zahájené located in Bystřice pod Hostýnem. In the first part there are described terms and used methods occurring in this bachelor thesis in general. Second part is dedicated to measurement procedure and following creation of the thematic map in scale 1:500.
|
|
| |
|
|
Deformation Measurement of Roof Structure
Hubáček, David ; Švábenský, Otakar (referee) ; Bureš, Jiří (advisor)
The thesis deals with the evaluation of displacements and deformation of the large span wooden roof structure of the aquapark hall in Brno - Kohoutovice. The task of this work is to compare and verify the applicability of the laser scanning method for the evaluation of displacements and deformation. The comparison was performed with regard to the polar method with quantities measured by the total station. As part of the work, two-stage measurements were performed on the basis of which a comparison of both methods was performed. The data obtained by the polar method were processed using LSM, the data from laser scanning were processed in an Excel spreadsheet. A comparison of the two methods shows that we have achieved a similar level of accuracy with the laser scanning method when compared to the polar method. It is therefore possible to use the laser scanning method to measure displacements and deformation.
|
|
|
Thematical map of carst surface - Jedovnický brook spring
Netolický, Lukáš ; Machotka,, Radovan (referee) ; Kratochvíl, Radim (advisor)
This bachelor thesis deal with creating thematical map of karst surface near spring of Jedovnicky brook. This location is in the middle of Moravian Karst. The thesis is focused on creation suitable surveying network, which was created by polygon two-side attached and oriented. Requirements for this are listed here. Surveying of individual points was realized by polar methode. The content is further description of the resulting errors in the measurements and their removal. There is also discussed creating thematic maps in CAD software. For creating thematic maps was used software Microstation developed by Bently. Work should provide opportunities for accurate orientation in the location and the possibility of better protection.
|
|
| |
|
|
Measurement of changes in the inclination of the Velký Kosíř lookout tower structure due to the influence of wind stress
Smetana, Jonáš ; Bárta, Ladislav (referee) ; Bureš, Jiří (advisor)
This thesis deals with the issue of displacements and deformations of building constructions. Specifically, it deals with changes in the inclination of the Velký Kosíř lookout tower structure due to wind stresses. The first part of the thesis deals with the theoretical description of the issue of displacements and deformations of buildings and measurement methods. The second part presents the testing of the geodetic method used for dynamic measurement. This involves setting up a total station in an automatic tracking mode and aiming a reflecting prism. The third part then deals with the actual measurement of the lookout tower Velký Kosíř, evaluation of the stage measurement, interpretation of the results and comparison of the methods used. These methods are represented by the polar method in a standard mode and the polar method in the mode of automatic tracking of the reflection prism and measurements of dynamic acceleration using accelerometer. The final objective is an evaluation of the inclinations under given wind conditions and the evaluation of the lookout tower inclination in the long term.
|
|
|
Thematical map creation in locality V zrcadlech - southern part
Chalupková, Klára ; Weigel, Josef (referee) ; Kratochvíl, Radim (advisor)
The intention of the bachelor’s thesis is geodetic survey of former mining sites V zrcadlech and creation thematic map of area of interest at a scale of 1:500 and according to ČSN 01 3410 Maps of large scales. Base and thematical maps. The first part of the thesis deals with the preparation and surveying of the site. The second part deals with the office work, both data processing, as well as creation of the thematic maps. There was built survey net of auxiliary survey points on the site, which was determined by polygonal traverse and three-tripod equipment system using a total station. Connection of the traverse was carried out on horizontal control and points measured using GNSS. Points of detailed survey were measured from auxiliary survey points. The computational work was made in software Groma v. 7.0 and the graphic work was made in software MicroStation PowerDraft V8i and Atlas DMT.
|
|
|
The Mapping Survey of locality in Jedovnice
Pšikalová, Věra ; Kratochvíl, Richard (referee) ; Kuruc, Michal (advisor)
This thesis is concerned with mapping of topography and altimetry in Jedovnice. The main object of the survey has been access road to the campsite with its adjacent terrain along the Olšovec pond. The final outcome is a map created with use of a tachymetry method in a scale of 1:500 and in the 3rd class of accuracy. The resulting map is subject to the standards ČSN 01 3410 and ČSN 01 3411. This thesis begins with theoretical knowledge of maps as a general term and continuously leads to practical knowledge leading to final map creation.
|
|
| |
|
|
The drawing up of purpose Map
Adamcová, Jana ; Ježek, Jiří (referee) ; Fišer, Zdeněk (advisor)
The purpose of this bachelor’s thesis is to focus on planimetry and altimetry of the area SEKO Aerospace a.s. in Louny. Then furter creating of the thematic map in scale 1:500, which contains planimetry, altimetry, surface signs of utilities and more detailed planimetric elements of the locality. The resulting map will be used for the service purposes, planning and projection of the structural modifications at the company premises. The theoretical section of work describes all the stages of creating thematic map.
|
guest ::
